Products

FriCmoLub^®

• Extends the service life of wheels and rails considerably
• stable grease ensures good fixation on the wheel flange
• good water resistance
• uniform spray pattern and volume over the entire temperature range
• excellent wear protection and corrosion protection under extreme pressure properties and high loads
• successfully tested by device OEMs.
• FriCmoLub contains graphite as a solid lubricant, which ensures the emergency running properties
• biodegradable – easily degradable in accordance with OECD 301 B.
  
  – easy biodegradability –  (60 % in 10 days)
  – EU Ecolabel certified
  
  More with the Contactform

RailLub^® 2.0

High Performance Environmentally Friendly Wheel Flange Lubricant.

RailLub 2.0 is for use in trainborne wheel flange lubricators wherever there is a requirement for an environmentally friendy lubricant that delivers class leading performance.

• Class leading performance whilst meeting the demanding environmental requirements.
• Extends wheel and rail life
• Proprietry thickener technology ensures outstanding wear protection under extreme pressure and high loads
• Product stability gives uniform spray patterns and application volumes over the entire operating temperature range
• Excellent wheel flange adhesion
• Good water resistance
• Water resistant to remain effective in wet conditions
• Widely compatible with wheel/rail lubricants and friction management products.
• Contains graphite as a solid lubricant to provide backup protection in the event that grease supply is interrupted.
• Winter proof, wide range of temperatures – a grease for all seasons.

Readily biodegradable according to OECD 301 B -70 % in 28 days.

RailLub is available in other versions and functions.
The other versions have the following properties and effects:

RailLub^®

was developed to reduce the roll and sliding friction between wheel flange and rail flanks that occur under extreme pressure stresses during the operation of rail vehicles. Thus, the life cycle can be effectively extended.

Properties:

• Achieves substantial wear reduction
• low dosing, high performance
• strongly adhesive, no slinging off
• stable lubricating film
• carry-over effect wheel – rail – rail – wheel
• increases safety, reduces derailment risk
• biodegradable – easily degradable in accordance with OECD 301 B.

More with Product list or Contactform

RailLub^® TS

RailLub TS has been tested and approved by well-known users. The consistency was especially designed for these installations. The application is problem-free and with machine filling no air inclusions occur.

Properties:

• Prevents curve squealing at the rail flanks
• thin film suffices, thanks to extraordinary
• adhesion
• passing wheels distribute the lubrication film evenly at a length of up to 3000 meters (1.86 miles)
• biodegradable – easily degradable according to OECD 301 B.

RailLub TS is available in various designs and features.
More with Product list or Contactform

HeadLub ^®

HeadLub Top-of-Rail Conditioner against curve squealing. High-pressure lubricant compound, contains selective, chemically treated solid lubricants which cause a conditioning effect upon the rail.

Properties:

• reduces wear and abrasion
• squealing is immediately eliminated
• extraordinary adhesion
• obtains a dry surface coating with depth effect
• adheres to a wet rail over prolonged periods
• water repellent, long-term protection
• biodegradable – easily degradable according to OECD 301 B

HeadLub is available in various designs and features.
More with Product list or Contactform

HeadLub^® TS

HeadLub TS is a Top-of-Rail Conditioner against curve squealing for stationary installations and consists of synthetic esters, fatty soaps, fatty lubricants and additives. Its properties accelerate the surface smoothing between the top of the rail and the wheel surface.

Properties:

• Reduces wear and abrasion to a minimum
• the unpleasant squealing is immediately eliminated
• a very thin application offers long-term protection due to excellent adhesion
• achieves dry surface coating with depth effect, which adheres longer to the wet rails and acts water repellent
• the passing wheels distribute the film evenly at a length of up to 1000 meters (0.62 miles)
• biodegradable – easily degradable according to OECD 301 B.

HeadLub TS is available in various designs and features.
More with Product list or Contactform

SwitchLub

• Decreases the occurring sliding friction
• reduces wear greatly
• already upon lower dosing, a strong-adhering lubricating and adhesion-preventing film forms between the friction sections
• reduces the re-lubrication intervals significantly
• offers excellent corrosion protection
• guaranteed consistent function from -40°C (F) to +180°C (+356°F)
• prevents icing and can be applied at up to -25°C (F)
• is stable at extreme pressure and heat stress for a long time period
• guarantees a constant lubrication
• biodegradable – easily degradable according to OECD 301 B

SwitchLub 60/35 with Ecolabel

Pantotec DK

During the winter months, prevents icing of the contact wire of trolley buses, Trams and other rail vehicles with overhead wire.

• Mixture of glycols, polymers and additives
• no resin formation at the contact wire
• very high adhesion and sticks to the contact wire in dry weather for several days
• eco-friendly
• can be mixed with water
• upon heavy rain or snowfall the process has to be repeated
• can be sprayed on accurately over a contact wire de-icing structure  upon request.
• IGRALUB offers suitable systems.

Carrier liquid 80% degradable

IGRALUB can organise a suitable system on request.